Blog Post

How to Restore Your Original Windows | Glaze & Save

Replacing sash windows not only affects the look and character of your building, it is also extremely expensive and potentially damaging to the structural integrity of the building itself.

On top of this, replacing original sash windows can be incredibly wasteful. The high-quality wood that forms the basis of original timber windows is extremely hard to come by these days, meaning that the replacement and eventual discarding of these frames would be an unnecessary waste.

Not only that, but plastic double glazing tends to only have a useful life of around twenty years or so. After this they often end up as landfill, consuming vast amounts of energy in their production to become waste. As we enter an era of ever-scarcer resources and climate uncertainty, reducing waste and energy consumption is of paramount importance.

There are three different options for original sash and case, and single glaze windows.

3 Steps to Perfect Windows

Restoration

The first option is to restore the windows. This involves 1) the replacement or repair any damaged wood in the windows; 2) ensuring that the windows are fully operational and able to open and close, removing, weighing and cleaning the windows, while allowing for cleaning access; and 3) to replace and restore any ironmongery on the frames. Most restoration companies only restore the windows, they do not paint them.

Draughtproofing

The second option is to draughtproof the windows. This involves removing the windows and mitring out a channel around all surfaces of the window, before putting in a draughtproofing brush; then putting the windows back in place and affixing optional beading around the existing window. This is quite an invasive process. It can weaken the base of the window as it involves putting in dowels, and over a relatively short number of years this can make the lower sill weaken and come away.

The second option is to add InvisiSeal™. InvisiSeal™ is a liquid draughtproofing product that dries like rubber, creating an airtight seal around your windows and doors. It’s a non-invasive process which involves no screws or nails, keeping your window frame fully intact and strengthened. This allows you to fully open and close the windows while enjoying the benefits of draughtproofing.

Thermal Efficiency

The third part is to make your windows thermally efficient; this means that the whole window area becomes thermally efficient and repels heat back into the room in the same way that the other surfaces in the room will. There are many different options. The first option is to remove the single glazing and replace it with double glazing; however this must be used with some form of draughtproofing. The second option would be to retain your original windows and install secondary glazing.


1. Restoration

Paint Removal

Over time, a build-up of paint can just your windows to become stiff, or even make it impossible to open your windows at all. By removing the many layers of paint, your windows can experience a new lease of life. Equally, cracked and flaky paints and finishes can cause the wood of windows to become exposed to the elements. By restoring the paintwork, you windows will have a protective finish that ensures they last for years to come.

Cord Replacement

Sash windows are counter balanced with two pairs of weights which run over a pulley system. Over time, the cord that supports these weights can become weakened, or even snap entirely. A weakened or snapped cord will make it difficult to open and close your windows. Replacement of the cord allows your windows to move freely once more.

Repair/Replacement of Rotten Wood

Original windows are features that add period charm to your property. The downside to this is that the original wood can become rotten or otherwise comprised. A thorough restoration service will delicately and sympathetically repair and replace areas of rotten frame, ensuring your window stands the test of time. From time to time, this may include the replacement of the entire window frame, although this is often a last resort.

Ironmongery

The final element of your window restoration is the installation of elegant yet practical ironmongery in keeping with the look of your windows. Standard finishes tend to be in brass or polished chrome. This step can really enhance the finish of your window restoration. However, be aware that some companies will remove your original ironmongery and replace it with shiny new ironmongery: always inform your window restorers if you wish to retain your original ironmongery.


Window Restoration Specialists

There are many window restoration companies out there, so how do you know who to trust? As bespoke magnetic secondary glazing experts, we often come across the work of window restoration companies. The consistency of work and professionalism across the board can vary wildly. We’d always recommend that you obtain testimonials, or better yet, personal referrals.


2. Draught-proofing

Restoration of your original widows is not just about mending your existing windows. Certain additions can be retrofitted to your original windows in order to increase their efficiency, and your comfort. Draughtproofing is one of the most important aspects of the window enhancement process.

Draught-proofing Brushes

Draught-proofing brush strips can be added during your window restoration in order to fill the gaps that surround your windows. These lasting brushes ensure that your windows are sealed while still allowing for adequate ventilation. Adding draught-proofing to your windows and doors can save up to £50 per year; not surprising when you consider that the gaps around your sash windows can be the equivalent of an opening measuring a minimum of ten inches.

InvisiSeal™

InvisiSeal™ is a patented permanent liquid draught excluder exclusive to Glaze & Save. For doors and windows, made from a tough, flexible silicone, InvisiSeal™ protects like silicone with all of the durability and flexibility of rubber. Typically reduces draughts by over 50%. Reduces energy bills by up to 20%.


3. Thermal Efficiency

While window films and draught-proofing brushes are excellent at reducing draughts from your windows, the overall energy efficiency of your windows will remain unchanged. For example, if you have original single glazing, you can expect the U-values of your windows to remain at around 5.5. This means that you could be losing heat up to 16 times faster through your window than through your walls. To tackle the U-value of your windows, while addressing a host of other issues such as condensation or fading, it pays to look into further glazing options that you can add to your windows.


Window Films

Window film can be the ideal inexpensive solution to temporarily enhance the thermal efficiency of your home. Window films can come in a variety of finishes, many with exceptional thermal properties. InvisiFilm™, our convenient and discrete window film, is a stylish alternative to net curtains or patterned glass. Combating a host of window-related issues, whether you require extra solar protection, to changing up those net curtains, InvisiFilm™ can offer up a solution.


Secondary Glazing

Secondary glazing involves installing supplementary glazing on the inside of an existing single-glazed window.

Unfortunately, traditional secondary glazing is expensive giving a long payback time; it uses screws and there is a requirement to redecorate after installation. Ugly, plastic frames go yellow over time and are not always compatible with listed buildings or conservation areas. It can also be potentially hazardous, as the plastic frame become brittle over time, placing the glass in a precarious position. It also ultimately damages the window frame and surrounding area, making it bulky and unsightly.

You can maintain the look and character of your windows by choosing a secondary glazing option which is virtually invisible whilst given all of the benefits (and more) of double glazing. Bespoke magnetic secondary glazing InvisiTherm from Glaze & Save is an innovative polycarbonate solution that reduces heat loss, noise pollution, eliminates fading, draughts and condensation with a guaranteed payback and energy bill reduction of 22.5%.

by T EWING 25 Feb, 2020
City centre living can be wonderful – restaurants, bars, culture and entertainment on your doorstep – but for some urban homeowners noise and pollution can be a concern. That was the situation Danny Sewell found himself in when he bought a historic Grade B listed townhouse on Atholl Street, Perth in 2018. The 1850s-built property needed complete renovation, but as a civil engineer, Danny was more than up for the job. Danny knew he needed to upgrade the beautiful traditional windows in his home, as they faced a daily onslaught of noise and dirt created by vehicles on Atholl Street, a main thoroughfare channelling traffic to Perth’s bridges over the Rive Tay. Danny also had concerns about condensation, finding the windows running with moisture almost every morning. Having been quoted astonishingly high figures for the type of double glazing specified by Historic Environment Scotland, Danny was determined to find a more affordable alternative that would also allow him to keep his lovely heritage glazing. As luck would have it, Danny’s friend Craig who is a recently qualified installer with Glaze and Save and persuaded him to consider InvisiTherm®. Initially, Danny was cynical; having studied in Edinburgh he had spent time in student flats with old fashioned secondary glazing which was clunky, intrusive and meant windows couldn’t be opened. Craig explained that InivisTherm® is, as its name suggests, almost invisible and would allow windows to be opened and the original internal shutters to be used. Craig also convinced Danny that InvisiTherm® would significantly reduce traffic noise and pollution in the property. A few weeks later and Danny had InvisiTherm® installed – by his friend Craig – and he is delighted with the results. “I used to be woken in the night by lorries thundering down the street, and I had to turn the TV up over the traffic noise at times, but that doesn’t happen now. It is just so much quieter. There’s also no more black dust settling on the inside of the glazing – that used to be a symptom of the pollution coming from vehicles outside. And there’s absolutely no condensation now, either.” In his profession, Danny is used to hearing great claims being made about new technologies, but reckons that InvisiTherm® is one of the very few products that delivers even more than it promises: “I am genuinely amazed at the difference InvisiTherm® has made. I believed Craig when he told me it would do what I needed, but the reality is so much better than I imagined. My house is much quieter, cleaner, easier to look after, and a pleasure to be in. “I love living in the centre of town, and it’s even better now that I have a quiet, clean home to come back to after a night out on the town.”
by T EWING 25 Feb, 2020
Jessie Mac’s in Birnam, Perthshire occupies an imposing B-listed property in the centre of this lovely village, and offers quality, affordable holiday accommodation. Described as ‘truly a world-leading example of sustainable and green business’ by Green Tourism, Jessie Mac’s has been awarded the Gold level in the Green Tourism Business Scheme and a plethora of other prizes. Seven years ago, as part of her commitment to make the business as sustainable as possible, Jessie Mac’s owner Brenda decided to do something about the huge original sash and case windows which made it almost impossible to keep temperatures in some rooms at a comfortable level through the cold winter months. Brenda previously headed a local authority’s sustainability and climate change team and knows a thing or two about how to work out cost effective solutions to eco challenges. She engaged with the Energy Savings Trust and the area’s conservation officer and realised that secondary glazing was likely to be the best way to reduce heat loss while maintaining the style of the building. After a couple of false starts with mainstream glazing companies who could not provide an acceptable solution – in particular their secondary glazing systems would not allow the original internal shutters to be used – Brenda heard about InvisiTherm® and approached Glaze and Save to arrange a survey. That survey, carried out by Glaze and Save CEO Tanya Ewing proved to be the point at which Brenda knew she had found the right solution. “Tanya is extremely professional and clearly passionate about what she does” says Brenda. “She made a suite of recommendations about what we could do to increase comfort and reduce our energy bills. She helped us ‘test the water’ by installing InvisiTherm® in our very coldest room to begin with – and what a difference that made! “We had found it impossible to raise temperatures in that room above 11C on winter nights and so we could not let it out for four months of the year. As soon as we had InivisiTherm® installed, the room became warm and comfortable and we were then able to accept bookings for the colder months.” That first experience of Invisitherm® was so successful that Brenda went on to commission more installations, focusing on rooms where warmth was of greatest concern. Brenda now enthusiastically recommends InvisiTherm® to other hospitality businesses seeking to up their green credentials while making a sustainable profit. “Looking purely at payback based on the extra bookings we had for that room, it took only ten extra nights to cover the cost of having InvisiTherm® installed. It doesn’t take an expert to know that is an amazingly quick payback time. I am a huge advocate of InvisiTherm® now, because I know how much it can contribute to the sustainability of a business.”
by T EWING 25 Feb, 2020
When Mrs D and her family moved from a 1960s villa in Warwickshire to a 200 year old Perthshire manse they were blissfully unaware of just how cold a stone-built house can feel in depths of a Scottish winter. Having fallen in love with the B-listed property, which is situated in an idyllic rural hamlet, in August 2017 the family moved in and set about redecorating and generally making the house a home. Confident in the previous owner’s installation of a ground source heat pump and numerous solar panels, along with three wood burners and oil-fired central heating, the family looked forward to a cosy festive period in their new home. However, they were taken aback to find that keeping the house warm every day was a real challenge, and that some rooms were completely unusable in winter. “We have a beautiful billiard room which also serves as a formal dining room and I had dreamt of a fabulous family Christmas centred around it; but even with extra heaters in the room it was just too cold. My dreams were shattered,” says Mrs D. As winter progressed, Mrs D began to investigate how the property could be made warmer and more welcoming. She searched online for glazing options, which were limited because of the house’s B-listed status. A local glazing company quoted for appropriate double glazing but the cost was completely prohibitive. Looking online again, Mrs D sought alternatives and came across Glaze and Save and its InvisiTherm® system and arranged for a survey to be done. “As soon as I met Tanya, Glaze and Save’s CEO and lead surveyor, I knew I was onto something. She is so incredibly knowledgeable and enthusiastic, not just about glazing but about all aspects of home energy use. Tanya did a complete energy survey, using a thermal camera to show me exactly where the coldest spots were in our house, and explained that InvisiTherm® would make a huge difference to the heat being lost through our windows. “It was hard to believe that something so lightweight and discreet could make a big difference, but we decided to go ahead with having the system installed in our billiard room, and in the family bathroom which was another miserably cold room.” A few weeks later and the billiard room and bathroom were given the InvisiTherm® treatment and the family felt the difference immediately: “The bathroom went from being too cold to enjoy to being warm and pleasant within 24 hours. What a change! And the billiard room was hugely improved too. Tanya came back to see how we were doing and helped us identify some more changes to the billiard room – insulating under the floorboards and draughtproofing the door – which completed the transformation to a warm room.” With such a great first experience of InvisiTherm®, Mrs D decided to go ahead with having the system installed on many of the other windows in her home. As a result, the whole house is much cosier, and Mrs D estimates that her energy bills have dropped by around £900 a year. Now Mrs D feels she has the warm, welcoming Scottish country house she had been dreaming of. “I now love having friends and family to stay. Thanks to InvisiTherm® and Tanya’s advice, I know they will be cosy and comfortable and we can concentrate on enjoying each other’s company - as well as the odd game of billiards!”
by T EWING 25 Feb, 2020
Iconic buildings are a feature of the Glasgow skyline, but few are quite so prominent as Speirs Wharf, which rises above the M8 on the northern edge of the city centre. Originally an office and warehouse serving the Forth and Clyde canal, the complex is one of Glasgow’s most desirable residential destinations. The building was sympathetically refurbished in 1989 and became a symbol of the cultural and economic renaissance that was linked with Glasgow’s time of European City of Culture in 1990. Thirty years later, Speirs Wharf is as popular as ever, but for some residents the rising cost of energy has prompted action to improve the energy efficiency of their apartments. One homeowner taking action to reduce bills is David Cameron, a change management consultant who has lived in Speirs Wharf for ten years. David describes his energy bills as ‘going through the roof’ in 2019 which prompted him to take action, with tackling heat loss through the property’s windows being a priority. “The paned, single-glazed windows in our building are real feature of the complex, but they can be cold and draughty,” says David. “There’s also a bit of a noise issue with being so close to busy roads. The B-listed status means our options for replacing the windows are quite limited and the double glazing that is allowed is incredibly expensive. I was determined to find an alternative and I was intrigued when an online search brought up Glaze and Save’s InvisiTherm® system as a possible solution. “Funnily enough what really persuaded me was a YouTube video showing a frail old lady easily removing an InivisiTherm® panel to clean it. I realised that the system was light, easy to handle and was almost invisible when in place.” David got in touch with Glaze and Save and shortly after had InvisiTherm® installed in his bedroom, which has two ground floor windows looking on to a busy road. The difference was immediate and dramatic: “The traffic noise was reduced to a low hum and the room was so much warmer – in fact on the second night I woke up in the early hours because I was so warm – that had never happened before. I had to turn the thermostat way down from then on!” There was an unexpected bonus, too: the installer showed him how sooty deposits had clogged up the vents on the windows and explained that InvisiTherm® would minimise pollution entering his bedroom, a reassuring thought. Turning back to the main diver for his investment in InvisiTherm® - rising energy costs – David is delighted with the result: “Because I was concerned about my electricity bills, I’d been monitoring energy use in each room of my apartment and I can see that when I had InvisiTherm® installed, energy use in that room immediately dropped by a third. “That’s given me confidence to have InvisiTherm® installed in the rest of my windows, and had made me a bit of an advocate for the system in my building. This is a brilliant, iconic place to live and it’s great to have found a solution that allows me – and hopefully my neighbours - to enjoy living here without worrying about energy bills.”
by T EWING 13 Feb, 2020
Three years ago, a chance meeting between Glaze and Save CEO Tanya Ewing and local business owner Rachel Weiss led to a partnership that has helped the wellbeing of many people in Perth. Rachel, a professional counsellor who runs Perth’s Rowan Consultancy, met Tanya when hosting a business networking event at her practice on the city’s busy Kinnoull Street. Tanya noticed that the Victorian building had beautiful, large sash windows that allowed the light to flood in. However, she also noted that the windows single glazed, draughty and with the city centre roads just outside, allowed a lot of noise to enter the building. Rachel had not thought anything cost effective could be done to improve the windows, and so, particularly as she rents the premises, she felt the practice just had to accept the road noise and draughts. One conversation with Tanya at the networking event changed all that: immediately Rachel realised that the InvisiTherm® system could solve her problems, and could be installed quickly and at an affordable cost. Soon after, the Glaze and Save team installed InvisiTherm® throughout the practice, working over the weekend so as not to disturb counselling and coaching sessions that take place throughout the week. Immediately Rachel and the practice’s other counsellors noticed a big difference. The rooms were much warmer and lest draughty, and, most importantly for the service they provide, road noise was hugely reduced. Rachel explains why the sound insulating qualities of InvisiTherm® are so important for her work: “The most important thing we do here at the Rowan Consultancy is to listen. The last thing we want is for people to have to repeat themselves because a lorry rattled past at an important point in our conversation. InvisiTherm® has made such a difference to the road noise. Our counselling rooms are so much quieter and help our clients to feel relaxed and safe when they are talking things through with us. It’s a much better environment in which to support people who may be facing some challenging issues. “I am delighted that I met Tanya at our networking event – it great to have found a solution to problem we thought couldn’t be solved.”
by T EWING 20 Jan, 2020
Listed building status can be a challenge to keep warm, due to strict requirements that can mean original windows must be kept, or single glazing maintained. Add to that list beautiful working shutters and it can seem an impossible task to find an affordable, aesthetically pleasing solution that tackles heat loss and noise issues. We caught up with Mr and Mrs Bell who just eighteen months ago were desperate to find a way of improving the single glazed sash windows in their beautiful B-listed 1830s home in Perth. Now, thanks to the InvisiTherm® system, Mr and Mrs Bell have draft-free windows that keep the heat in and the noise out. “It was quite by chance that we came across the InvsiTherm® system,” says Mrs Bell, who moved with her husband from Northern Ireland in the 1990s to be closer to family in Scotland. “We’d been thinking that we needed to do something about our windows, but the listed status of our home really limited our options. Our home was cold and draughty and the windows ran with condensation, with black lines forming where the glass meets the frames. “We’d had standard secondary glazing installed in our bedroom but we were disappointed with how heavy and awkward it was and it didn’t seem to be making very much difference. Shortly after we had that work done, I happened to receive an invitation to the Scottish Listed Property Show in September 2018, and I decided to go along. “As soon as I met Tanya, the owner of Glaze and Save, at the show, I realised I had found the answer to our problems. The InvisiTherm® system sounded exactly what we wanted – a very discreet panel that Tanya promised would virtually eradicate condensation, reduce noise and make our rooms less draughty and much warmer. I was delighted to hear that it would also let us keep our working shutters, which was really important to me. “Very soon after that, Tanya visited us to do a survey and we decided to go ahead with installation of the InvisiTherm® in almost all of our rooms, on both windows and external doors. The work was completed on 24 December 2018, and it was wonderful to have a lovely warm, condensation-free home for Christmas. It really was every bit as good as Tanya promised it would be. “We have an armchair adjacent to a large window in our lounge, and I used to be concerned that visitors sitting in it would be chilled by the draughts, but I don’t worry about that any longer. The windows are draught-free, there’s no condensation and no black line developing any more. “We were so pleased with the results that we even asked Tanya to replace the standard secondary glazing panels we’d just had installed. The only thing that bothered me about that was it seemed wasteful to get rid of something so new. Luckily, Tanya recycles everything she can, so she found a way to reuse panels – serving as propagators in the garden of another client. And in return we received eggs laid by her free range chickens – a truly unexpected bonus!”
by T EWING 18 Jan, 2020
Bringing a beautiful old farmhouse into the 21st century with sustainability in mind has been a labour of love for respected academic Dr Eric Walker MBE. Dr Walker, whose origins in farming sowed the seeds for his planet-friendly lifestyle, became a doctor as a young man. Having worked in medicine over several decades in many countries around the world he has seen cultures and communities suffer as industrialisation forced them into new ways of living. Consequently, Dr Walker is determined that his own way of life should be gentle on the environment. Since moving into his lovely Stirlingshire home 17 years ago, Dr Walker has systematically worked to make his way of life more environmentally friendly. In addition to growing his own food in a garden based on permaculture principles, Dr Walker has invested in insulating his home and replacing an oil central heating boiler with a ground source heat pump, supplemented with a wood fired stove on the very coldest days. The next thing on Dr Walker’s list was to tackle the traditional single glazed windows in his Grade 2 listed home. Dr Walker wanted to preserve as much of the character of the house as possible, and its listed status drove him to investigate ways of treating his existing windows to reduce heat loss. “The InvisiTherm® system is just what I’m looking for,” says Dr Walker. “It minimises waste because it allows me to keep my existing windows rather than ripping them out; it makes a big difference to the heat loss; and the way Glaze and Save does business is very much in line with my way of thinking. “What really surprised me was that when she came to survey my house, Tanya was able to spot other issues that I can fix easily – like a particularly cold wall which I now know I can treat using insulated wallpaper. Changes that help tackle climate change are often very simple and inexpensive once you know what options are available.”
by T EWING 06 Jan, 2020
We feel very fortunate to live in a little cottage in the heart of a conservation area in Edinburgh, built in the 1860’s. With the aesthetic benefits of living in a lovely old property however come challenges too, particularly with insulation and heating an old stone-built property with sash windows. Over the years we fully insulated and sympathetically modernised the back of the cottage but we were limited with what we could do to the front of the house, governed by conservation rules. In particular, one bedroom with three external walls and two big sash windows with the original wooden shutters, proved to be a major challenge. We had already upgraded the original sash windows with conservation double glazing, but this is still very thin and made no discernible difference to the warmth or insulation of the room. I also fitted bigger radiators but, of course, all this valuable heat was simply escaping out of the poorly insulated old sash windows. Because I feel very strongly that all of us have a responsibility to protect the environment, it also felt so wrong to be pumping heat uselessly into this part of the house for it simply to evaporate out of the windows. I also dabbled with a dehumidifier to suck out the moisture from the air but, despite my best efforts, the windows continued to drip with moisture in the winter months. So, I had a conundrum - I love old buildings and believe that their aesthetic integrity needs to be protected. But I also knew that I had to find a healthier solution for this bedroom as it was potentially extremely hazardous for my health too. The problem Condensation eventually leads to mould if the source of the problem is not tackled effectively. Mould, in turn, can be very dangerous to asthmatics and people with respiratory conditions like me. I realised that I was stuck between a rock and a hard place – we’re not allowed full double glazing in my area and conventional secondary glazing looks inauthentic and would mean also that I had to give up my shutters too. This was a step too far for me as I felt it would devalue the original features of the cottage. What to do? The solution Glaze & Save. Through a new online search, I easily found this local, Scottish company that seemed to offer something quite different to the rest of the market and could actually meet my demanding brief in every way. After my initial online enquiry, the owner herself, Tanya Ewing, responded and shortly after visited our home to review the problem first hand – at the weekend! Tanya immediately understood my problem and outlined the solution. My brief was this – “can you provide me with a solution for my sash windows and bedroom that eradicates my condensation and mould problem; creates a healthy air environment; is eco-friendly and sustainable; is professionally fitted; is sympathetic to old buildings and allows me to still keep my old shutters? Oh yes, and one more thing, it needs to be virtually invisible to the eye and in no way detract from the aesthetics of the original building?” I felt like the client from hell. Luckily the answers were all ‘yes, of course!’. What is different about Glaze and Save? The big difference is the huge amount of research and science that has gone into the creation of these clever secondary, magnetic thermal panels (called InvisiTherm®) made of really light but strong transparent polycarbonate – not cheap acrylic or Perspex like the DIY alternatives. This means that they are easy to lift on and off, when I need to clean or open the windows, but simple to fit back on. The clever technology in the material really insulates the window and room well so it is now warmer overall and heat loss has been hugely reduced, which is good for the environment. I personally refer to them as my ‘healthy windows’ because that is what all the science really boils down to - they actually seem to allow the room to ‘breath’ and keep the windows lovely and dry, even after a freezing night. The result? Here’s the exciting bit. For the first winter since buying my house 20 odd years ago, I have had absolutely no condensation in my troublesome bedroom and the mould is a distant memory. I feel, at last, I can safely sleep in this room as an asthmatic and the air I’m breathing is healthier. It also means my old windows will last much longer and I have kept my lovely shutters. Finally, the windows are so discreet that no one notices them – a weird selling point I know but ‘invisible windows’ are just fine with me. Ruth F, Edinburgh
by T EWING 20 Dec, 2019
A warm dry home is essential for good health. Our InivisiTherm® system can make a huge contribution to a healthy home environment, virtually eradicating excess moisture, condensation and the black mould that can result from a cold damp home, as well as making homes warmer and easier to heat. We caught up with one customer who first had InvisiTherm® installed five years ago to find out how her health, and that of her family has fared since she had the system installed. Pauline Armory, a Registered Nurse, lives in a beautiful home in the idyllic village of Luncarty in Perthshire. With its decorative paned windows, her 1980s property has a style and character not often associated with buildings of that age. However, despite its prettiness, her home, which she moved into 17 years ago with husband Stephen and a young family, was damp, cold and hard to heat. What particularly concerned Pauline was the fact that every winter she and her family suffered repeated chest infections, coughs and colds that lingered for weeks. “Winter was difficult for us, we suffered from frequent chesty coughs and colds. And to add to the pain, our bill for heating oil was almost £600 every month – and our home was still cold and damp. That just wasn’t sustainable in any sense of the word. We set about doing everything we could to make our home warmer and dryer including replacing radiators and maximising insulation in our lofts and under the floor, but it didn’t make much difference. We even installed a biomass boiler which vastly reduced our heating bills. But our home remained chilled. Eventually it became clear to me that the windows were the culprit: they are very pretty paned windows, but they are single glazed. The cold surface of the glass caused huge amounts of condensation, and black mould was growing on every window. “I suspected that the condensation and mould on our single glazing were linked to our illnesses. Using my scientific background, I started looking into the association between cold, mould-ridden homes and respiratory illness and became increasingly concerned. I immediately started investigating what could be done to improve our windows. I had a quote for replacement windows but at almost £50,000, that just wasn’t an option. And anyway, our windows look lovely, they add so much character to the house – I didn’t want to rip them out. “My search for an alternative to replacing our windows led me to Glaze and Save, and I contacted the company owner Tanya Ewing to come and see what they could do for our house. What a revelation! She explained in detail why our windows were making our home so cold and damp and explained exactly how the InvisiTherm® system could help. We soon realised that the system would allow us to keep our nice windows while making a huge difference to the comfort in our home, and, I hoped, to our health. “We went ahead with a first phase of InvisiTherm® installation in our bedrooms. And what a difference we experienced immediately. Warmer, dryer, no mould at all and we still had our pretty windows. Over the next couple of years we installed InvisiTherm® in almost all of our paned windows. “It’s no exaggeration to say that our lives have been transformed since we had InvisiTherm® installed. We have a warm dry home that is pleasure to be in. I don’t spend hours cleaning the mould off our window frames and mopping up condensation. Our electric blankets have been banished to the linen cupboard and we use summer weight duvets for most of the year. But most importantly our winter illnesses have almost disappeared. The coughs, colds and chest infections that plagued us before are no longer a problem. “It’s helped our wider family too – we have a close relative who has Chronic Obstructive Pulmonary Disorder (COPD) and really struggled when she visited us. Now we have InvisiTherm® in place, she is warm, comfortable and we are able to enjoy her company without worrying about the effect of our home on her health.” Pauline is clearly delighted with her InvisiTherm® system and the way it has transformed her home. But as with any family, things change and with both her children leaving home to study, Pauline and her husband are thinking of a move to the city for the next phase of their life. “We’ve loved country life, but with our children heading out into the big wide world, we’re excited at the possibility of relocating to the west end of Glasgow. We dream of life in one of the gorgeous grand tenements there, and now we know how brilliant InvisiTherm® is, we know that those lovely big windows with views over the Botanic Gardens and Byres Road need not worry us – we know that InvisiTherm® can help us have a warm, healthy home wherever we live.”
by T EWING 21 Nov, 2019
It’s no coincidence that several of the UK’s national health charities run awareness campaigns in November. With the month usually heralding the start of the cold wintry weather and increased hours of darkness, not to mention the financial and emotional pressures of Christmas and holidays, many people feel the effects of existing physical and mental health conditions more acutely at this time of the year. This was on the mind of our CEO, Dr Tanya Ewing, when she noticed yesterday was World COPD Day. COPD (chronic obstructive pulmonary disease) affects 1.2 million people in the UK, and any sort of air pollution, inside or outside can greatly affect those living with a lung condition. When you consider that we spend about 90% of our time indoors – at home, at work, at school, or when we go to shops or restaurants - it is easy to see why the issue of poor indoor air quality is so relevant. How we heat our homes, poor ventilation and dampness due to climate change can all affect the quality of indoor air so there are some real and tangible health advantages in improving the energy efficiency of the glazing in your home or workplace. Having recently been challenged to say which of the United Nations Sustainable Development Goals (UN SDGs) the company is working towards, Dr Ewing reflected that, while it's clear that Glaze and Save’s sustainable business practices are in line with the UN SDGs of responsible consumption and production, and innovation in industry and infrastructure amongst others, the company's products and services also contribute positively to the UN SDG of good health and well-being. We have evidence, for example, that the InvisiTherm™ system helps to reduce and eliminate cold, condensation, dampness and mould from the interiors of buildings. This then has a positive and often profound impact on various physical health conditions such as pneumonia, asthma and bronchitis and other lung conditions as noted previously. Another product benefit is the ultra-violet blocking feature of the product which is important to those receiving cancer treatment and with suppressed immune systems. In addition, the company's products have been shown to have a positive impact upon people’s mental health. For example, by improving the energy efficiency of a property, the energy bills are significantly reduced, thus relieving financial pressure which often contributes to stress, anxiety and depression. Furthermore, we have evidence that the products reduce external noise which again can reduce stress and anguish for the inhabitants and promote well-being by creating a peaceful, comfortable environment. It’s well-known that if you are running short of sleep, it can affect your mood and how you interact with those around you, and that rest can help you think more clearly and positively. For more information on this topic, please visit our website at GlazeandSave.co.uk or contact us for more information. Also, Dr Ewing regularly gives talks on creating healthy homes – you can find details of dates and venues on our social media pages on Facebook and Twitter.
More posts
Share by: